Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGenie Cable & Drum Replacement: The North Las Vegas Owner’s Guide
We replace failed Genie cable and drum assemblies across North Las Vegas, and the typical installed cost runs $130 – $250 for the cable work, with the drum counted in when it’s worn out too. We can often get to a snapped or slipping cable the same day you call, and we quote the job on that call before anyone heads your way. Most owners don’t find this part failing by watching it. They find it by walking out one morning and seeing a loose steel cable coiled on the floor, a door sitting crooked, or a drum that won’t hold tension on one side. That’s usually the moment the phone comes out.
Which Genie Models This Applies To
Genie cable and drum parts split roughly into two families. Older chain-drive units (the 200, 500, and 700 series) and the screw-drive models use one style of drum and cable set, while the newer belt-drive and smart units (the 3050, 3150, and 6000 series) use a different drum diameter and cable length. Getting the wrong pair is the most common compatibility miss we see – the drum looks identical on the shelf, but the cable length is wrong for the door’s height and track, and it unwinds past where it should.
To match the part, find the model sticker on the powerhead (usually under the light lens or on the back panel) and measure your door’s height and spring wire size. That’s what tells us which drum and cable the door actually needs, not just what the opener came with. On the OEM question: Genie-branded drums are the safe bet, but a quality aftermarket drum from a known maker fits and holds up fine for most residential doors. We’ll tell you which way we lean for your model and why.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Genie Cable & Drum Replacement Is Failing
- A loose or snapped cable lying on the floor. The cable has jumped its drum or snapped outright. Once a cable lets go, the door loses tension on that side and can drop or twist.
- The door hangs crooked or binds on one side. One drum is holding tension and the other isn’t. That imbalance is a drum problem, not an opener problem.
- Cable wound over itself on the drum. The cable has climbed off its groove. It’s a sign the drum is worn or the cable is the wrong length.
- Cable fraying or kinked near the drum. Frayed strands mean the cable is at end of life. Kinks usually mean it’s been rubbing a worn groove.
- Grinding or popping as the door moves. The drum is binding on its shaft. Left alone, it can strip the drum and load the spring.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cable and drum work in North Las Vegas lands in that $130 – $250 range for a typical residential door, and it’s parts plus labor quoted as one number. We don’t itemize the drum and cable as surprise add-ons after the fact. What moves the number up: door height (a taller door takes more cable), whether both drums need replacing, and any spring or track damage the failed cable caused. We tell you on the call what the job looks like and we hold that number at the door. Every cable and drum job carries our 90-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check a few things yourself: look for the loose cable, check that both drums hold tension, and see whether the door sits level. What you shouldn’t do is try to rewind a drum or re-tension a cable by hand. Those cables are under heavy spring tension, and a slipping cable or drum can snap back and cause serious injury. That’s the line where we’d rather you call. We can talk through what you’re seeing, tell you whether it’s a cable-and-drum job, and get someone out if it is. Call (866) 347-9495.
FAQs
Most Genie cable and drum sets last roughly 10 to 15 years on a typical residential door, but North Las Vegas heat and dust shorten that. Cycle count matters more than calendar age, so a busy door wears out faster. Call (866) 347-9495 and we’ll tell you what’s left on yours.
Usually not. A worn or grooved drum won’t hold the cable properly, and reusing it just leads to another failure. Replacing the drum and cable together is the reliable fix. Call us for an exact quote – estimates are free.
Most single-door cable and drum replacements take about an hour to an hour and a half, once the right part is matched to your model. We can often do it same-day. Call (866) 347-9495 to check availability.
We match the part to your Genie model number and the door’s height and spring size, then bring the correct drum and cable set. We’re an independent service provider, not affiliated with Genie, so we’ll always tell you whether an OEM or a quality aftermarket part is the better call for your model. Call for a free estimate.
Otto’s Garage Door North Las Vegas handles Genie cable and drum replacement for homeowners across the area, along with LiftMaster and Chamberlain parts when your door runs one of those. If your Genie cable is loose, frayed, or your drums aren’t holding tension, call (866) 347-9495 for a free estimate.
Written by the team at Otto’s Garage Door North Las Vegas, serving North Las Vegas and nearby areas.